Need help? Give us a call
VTA Blow Off Valve Ford Mustang - T9468
In Stock
MPN: T9468
Pre-Order:
This product has been discontinued - This product has been replaced by the following:
RRP | £163.80
Will this part fit my car?
This part is compatible with your current selected vehicle
This part is not compatible with your current selected vehicle
Your Current Vehicle
Product Overview
VTA Blow Off Valve Ford MustangNotesThe VTA is a performance blow-off valve solution for Ford Mustang Ecoboost vehicles with an electronic factory diverter valve.
-->
If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.
The VTA shares the successful DV+ design philosophy:
“Keep what works, replace what doesn’t”
This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do.
The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.
GFB pioneered the use of “pilot operation” in the DV+, which works by re-purposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.
It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.
Key features:
- TMS Technology for faster boost recovery on gearshift and during throttle modulation
- Improved boost holding ability
- Atmosphere venting for blow-off sound
- Retains ECU control
- Simple, direct bolt-on kits include everything you need to install
- Manufactured in Australia in accordance with ISO 9001
VTA or DV+?
Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet.
Why choose a VTA over a “BOV spacer”?
“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance.
Why choose a VTA over a kit that includes a solenoid?
Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?
NotesThe VTA is a performance blow-off valve solution for Ford Mustang Ecoboost vehicles with an electronic factory diverter valve.Item Specifics Adjustment Adjustment Range Air Filter Type Bar Diameter BHP Gain Bolt Pattern Number of Holes Bolts/Nuts BrandGFB Carset Number Centre bore Classic Car Part Color Country of Manufacture Diagram Dimensions Dimensions (mm) Driver Wiper BLade Length Driver Wiper BLade Part No EAN Engine Equivalent Part Number FitsFits2 Fitting position Front Adjustment Front Adjustuble Front Axle Load Front Diameter Front L/H Front Low Front Lowering or Lifting Front R/H Height Hex Homologation Lengt Length Location on Car Lowering Front/Rear Manufacturer part Number Material MPNT9468 Number Of Gloves Offset frontier Other Part Number Pack Part Manufacturer Part Manufacturer Number Part Type Placement on Vehicle Position on Car Product Details Pssngr Wiper BLade Length Pssngr Wiper BLade Part No Quantity Rear Adjustment Rear Adjustuble Rear Axle Load Rear Diameter Rear L/H Rear Low Rear Lowering or Lifting Rear R/H Reference OE/OEM Number Scent Seat Series Size Spare Part Marking Spare part marking 1 Spare part marking2 Spare part marking3 Stamping System Thread Torque Gain Total Track widening (mm Type Unit Type Weight Wiper BLade Length NotesThe VTA is a performance blow-off valve solution for Ford Mustang Ecoboost vehicles with an electronic factory diverter valve.
Aircon notes Eibach notes PIAA notes Superpro notesThe VTA is a performance blow-off valve solution for Ford Mustang Ecoboost vehicles with an electronic factory diverter valve.
Terms & Conditions Terms and Conditions
By committing to buy you are agreeing to our terms and conditions.
All goods shall remain the property of TDC Automotive Limited until paid for in full.
lease contact us before placing your order Delivery ShippingUK - Most of our listings offer the following inland postage services;
2nd Class
1st Class
1st Class Recorded
24hr Courier (Usually City Link)
International:
Standard Airmail
Royal Mail International Signed For
Express Courier (Usually sent by Fedex)
Contact us
Tel: UK ? 01935 829671
International - 0044 1935 829671
Email: info@tdcautomotive.com
TDC Automotive Limited
Office 8, Building 3
Lopen Business Park
Mill Lane
Lopen
Somerset
TA13 5JS
Please note our operation is mail order only. We do not have the ability to take counter sales at our address. For this reason visits must be by prior arrangement ONLY without exception.
- Wiper Blades
Delivery
Estimated Delivery:
28th Nov 2024
To 29th Nov 2024
Upon receiving your order, please promptly inspect the goods. If you discover any defects or issues, notify us immediately for possible replacement.
Goods returned within 14 days in unused condition with original packaging qualify for a full refund. After 14 days, a re-stocking fee may apply. Include return reason and invoice number in your parcel.
Delivery times and charges are provided during the ordering process. While we aim for timely delivery, unforeseen delays may occur. TDC Automotive is not liable for delivery delays or failures.
Shipping Options
- UK: 2nd Class, 1st Class, Recorded, 24hr Courier
- International: Standard Airmail, International Signed For, Express Courier
Most items ship within 2 working days; we'll notify you of any delays within 24 hours.
For international orders, be aware of potential import duties and taxes in your country. Check with your local customs office before ordering.